Office/ENP WiFi

EW-7429HOB

AC1300 2T2R IP-55 Outdoor PoE AP

  • IP-55 weather proof enclosure
  • 2T2R Concurrent Dual Band
  • 11AC Wave 2 MU-MIMO
  • Up to 1750Mbps
  • Qualcomm IPQ4018 Dakota chipset
  • Gigabit PoE out Port for attachment of IP camera
  • 2 External Antennas

The EW-7429HOB is a highly-reliable industrial outdoor wireless access point designed to extend wireless network coverage for enterprise users.

With the latest wireless 802.11ac technology for improvements in the speed, reliability and quality of wireless communications, the EW-7429HOB provides operation in 2.4GHz and 5GHz wireless coverage for maximum flexibility.

The high reliability capacitors used in the EW-7429HOB guarantees safety for long term usage. Power Saving function not only saves the power consumption of the access point but also saves the power of battery for connected mobile devices.

Additionally, the EW-7429HOB features two gigabit LAN ports. One is for Power over Ethernet PD-IN and another one is Pass-through PSE-OUT which can power up another IP Camera or networking device.
HARDWARE SPECIFICATIONS
MCU/RF
Qualcomm Atheros IPQ4018 Quad-Core 710MHz + QCA8072
Memory
DDR3 256MB
Flash
SPI Flash 32MB
Physical Interface
- LAN : 2 x Gigabit Ethernet with PoE support
- LAN1 (IEEE802.3at PD-IN)
- LAN2 (IEEE802.3af PSE-OUT)
- Reset Button
- SMA Connector x 2
Power Requirement
Power over Ethernet, IEEE 802.3at (PD-IN)
LED Indicate
Power, Status, LAN1, LAN2, 2.4G, 5G
Power Consumption
AVG 12W , Peak 15W (without PSE out)
Antenna
External Dipole Antenna x 2 (2.4G: 3dBi, 5G: 4dBi)
Others
Internal Buzzer (Find me)
RF SPECIFICATIONS
Wireless Standard
IEEE 802.11 a/an/ac
Frequency Band
Radio Ⅰ: 802.11b/g/n  2.4000~2.4835(GHz)
Radio Ⅱ: 802.11a/n/ac  5.150~5.250(GHz), 5.250~5.350(GHz),
                 5.470~5.725(GHz), 5.725~5.850(GHz)
Operation Channels
2.4GHz : US/Canada 1-11;  2.4GHz : Europe 1-13; 
5GHz : The support channel is restricted by local regulatory requirements:
             36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128,
             132, 136, 140, 149, 153, 157, 161, 165
Transmit Power
802.11b(2.4G)
19dBm@ 1Mbps
19dBm@ 11Mbps
802.11g(2.4G)
19dBm@ 6Mbps
16dBm@ 54Mbps
802.11n/ac(2.4G)
19dBm@MCS0 (HT20)
16dBm@MCS7 (HT20)
15dBm@MCS8 (HT20)
18dBm@MCS0 (HT40)
15dBm@MCS7 (HT40)
13dBm@MCS9 (HT40)
802.11a(5G)
19dBm@ 6Mbps
14dBm@ 54Mbps
802.11n/ac(5G)
19dBm@MCS0 (HT20)
13dBm@MCS7 (HT20)
13dBm@MCS8 (HT20)
17dBm@MCS0 (HT40)
13dBm@MCS7 (HT40)
11dBm@MCS9 (HT40)
802.11ac(5G)
16dBm@MCS0 (VHT80)
13dBm@MCS7 (VHT80)
12dBm@MCS9 (VHT80)
Receiver Sensitivity
802.11b(2.4G)
-93dBm@ 1Mbps
-84dBm @11Mbps
802.11g(2.4G)
-83dBm @6 Mbps
-68dBm@54Mbps
802.11n(2.4G)
-83dBm@MCS0 (HT20)
-65dBm @MCS7(HT20)
-62dBm @MCS8(HT20)
-82dBm @MCS0(HT40)
-61dBm @MCS7(HT40)
-55dBm @MCS9(HT40)
802.11a(5G)
-83dBm@ 6Mbps
-66dBm@ 54Mbps
802.11n/ac(5G)
-82dBm@MCS0 (HT20)
-62dBm @MCS7(HT20)
-60dBm @MCS8(HT20)
-80dBm @MCS0(HT40)
-61dBm @MCS7(HT40)
-54dBm @MCS9(HT40)
802.11ac(5G)
-76dBm@MCS0 (VHT80)
-61dBm@MCS7 (VHT80)
-51dBm@MCS9 (VHT80)
SOFTWARE SPECIFICATIONS
Operation Mode
Access Point / WDS Bridge / WDS Access Point / Client Bridge mode
Multiple BSSID
Total 32 (16 for 2.4G, 16 for 5G)
VLANs
SSID and Ethernet port based Tag/Untag (VID=1~4094)
Wireless
Wireless Mode : 11 a/11b/11g/11n/11ac
Channel selection (Setting varies by country)
Channel bandwidth (Auto, 20MHz, 40MHz, 80MHz)
Transmission Rate :
2.4GHz : 11b, 11g, 11b/g, 11g/n, 11/b/g/n
5GHz : 11a, 11a/n, 11a/n/ac       
Pass-through
Support IPv6 and VPN Pass-through
QoS
WMM, Max Associated Station Number
WPS
Software
Security
WEP Encryption – 64/128 bit
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP or AES)
802.1x Authenticator : MD5/TLS/TTLS/PEAP
EAP-FAST, EAP-SIM, MAC Authentication
SSID Broadcast enable / disable
256 WLAN MAC Address Filter
WLAN L2 isolation (AP mode)
Wireless STA(Client) connected list
MANAGEMENT
Tx Power Control
Adjust transmit power by 10, 25, 50, 75, 90, 100%
Configuration
Web-based configuration HTTP/HTTPS/SSH/CLI
Firmware
Upgrade via WEB, CLI, TFTP and FTP
SNMP
v1, v2c, v3. MIB II, IEEE802.11MIB, BridgeMIB, Interface MIB, Private MIB
Auto-Channel
Automatically selecting lease congested channel
Backup & Restore
Save & Restore settings through management interfaces
CLI
Support Command Line Interface
Power Saving
Support ARP Proxy for connected wireless client
Advanced Features
Power Saving
ARP Proxy can help to save connected wireless client’s battery by being a proxy to reply the ARP request from LAN side
VLAN Tagging
VLAN tagging per SSID and Ethernet port which also works in WDS interfaces
High Speed Hand-Over between Access Points
With optimized PMK-Caching, the hand-over speed of mobile clients between access points can be highly improved.
Smooth Site Survey
Minimal ping and throughput loss during site survey procedure, producing stability for wireless connections in the local network environment. 
WMM QoS Mapping
Configurable Wi-Fi Multimedia (WMM) parameters for better network traffic management.
 Advanced Qos Management & Traffic Shaping
Traffic priority can be arranged and managed by SSID, MAC address, port and IP address
Load Balance
Maximum number of users can be adjusted for each SSID.
ENVIRONMENT & PHYSICAL
Temperature Range
Operation : -40 to 50℃ (-40℉ to 122℉)
Storage : -40 to 70℃ (-40℉ to 158℉)
Humidity
90% or less – Operating, 90% or less - Storage
Certifications
FCC, CE, IEC60950-1, IEC60950-22
Dimensions
242.27(L) x 120.93(W) x 48.78(D)mm
Weight
632g (AP: 594g, Antenna: 38g)
Weatherproof rated
IP5X, IPX6
Package Content
1 x EW-7429HOB Access Point
1 x Wall/Pole Mount Screws Kit
1 x Quick Installation Guide